Ld-systems ZONE 624 Manual de usuario descargar pdf (Pagina 7)

connectionS, ConTRoLS, AnD InDICAToRS:

AUX enABLe InPUT 1

Switch with built-in blue LED to select the input

source for the INPUT 1 channel. If the switch is not

pressed, the LINE input on the back panel is selected

as the signal source. In the pressed position, the AUX

input on the front is selected (LED is on).

GAIn InPUT 1 - 6

To harmonise playback devices (CD player, MP3

player etc.) with different output levels, adjust the

input gain of the INPUT channels 1 - 6 with the

help of this GAIN control.

SIGnAL LeD InPUT 1 - 6

The signal LED lights up green when an audio

signal is present at the input of the respective

channel. The LED lights up red when the optimum

volume level (0 dB) is reached.

VoLUMe InPUT 1 - 6

Volume control for channel INPUT 1 to 6.

CUe InPUT 1 - 6

Cue switch with built-in red LED for INPUT

channels 1 - 6. If the switch is pressed (LED is

on), the input signal is routed to the headphone

output on the front panel of the device. The signal

is sourced before the volume control of each

channel, therefore it is independent of the setting

of the volume control.

MASTeR LeVeL

Volume control for the MASTER channel.

LeVeL MeTeR STeReo MASTeR

Level meter display with 2 x 10 LED segments

(left / right). Once the peak LED (PK) lights up, the

device is operating at the distortion limit. It is not

critical if the LED lights brieﬂy at peak levels for the

incoming signal, however continuous illumination

should be avoided by reducing the volume.

ITALIANOPOLSKIESPAÑOL

FRANCAISFRANCAIS FRANCAISFRANCAIS

FRANCAISDEUTSCHENGLISH

19 20

1 2 3 4 5 6 7 8 9 10 11 12 ... 123 124

Sin comentarios

Ld-systems ZONE 624 Manual de usuario Pagina 7